Engineered for loads up to 1.5A, the NKA 161215 extends the 12V supply for devices requiring extra headroom. Thanks to its wide 90–300 V AC range, robust efficiency (~80%), and built-in protections, this adapter reliably delivers power in environments where grid voltage may fluctuate, making it a versatile solution for home, office, or small industrial settings.
Voltage Range: 90–300 Vac
Max Input Current: 0.6 A
Frequency: 50 Hz (48–52 Hz)
Inrush Current: ~12 A (cold start)
Voltage: 12 V ±5% (11.4–12.6 V)
Current: 1.5 A
Ripple & Noise: Max 75 mV / Max 2 mV
Output Power: ~18 W
Rise Time: ~8 ms, Hold-Up Time: ~30 ms
Overload: ~2.0 A fold-back
Short Circuit: Hiccup mode
Over Temperature: Automatic shutdown/recovery
Over Voltage: 13.8 V DC
~80% at full load
1.5 kVac isolation, ~3 mA leakage
Operating Temp: 0–50 °C
Storage Temp: 0–70 °C
Humidity: 5–95% RH
2/3 Pin Wall-Mount form factor
Cable: ~1.5 m, DC Jack: 2.1/5.5 or Micro USB
Increased Current Capacity: Up to 1.5A for moderate to higher 12V loads.
Wide-Range Input: Handles mains voltage fluctuations from 90–300 Vac.
Safety Features: Overload, short-circuit, and thermal shutdown protect both device and supply.
No-Fan Cooling: Convection-based design means quiet, low-maintenance operation.
Stable 12V output with minimal ripple for sensitive equipment.
Adequate overhead for systems that occasionally exceed 1A.
Fold-Back Overload: Protects against sustained high current draws.
Hiccup Mode: For short-circuits, quickly restoring service once cleared.
Thermal: Shuts down at high temperatures, reactivates when safe.
30 ms hold-up time helps manage minor power sags.
UL94-rated enclosure (if applicable) for added safety.
EMI/EMC to CISPR22 / IEC61000
Meets or exceeds IEC 60950 for safety
More power-hungry 12V modules, motors, or fans
Small industrial control systems, instrumentation, or sensor networks
Higher-capacity LED installations or signage